11-16-2023 07:48 AM
Please HELP
I encountered this error after UPDATING the system from version 6.6.1 to 7.2.5
Now it says that there is no access to the Internet, although all users have access
What can be done?
11-16-2023 07:51 AM
If your mgmt is not outside port
Then
Interconnect mgmt port to one of data port.
Config data port to be gw for mgmt port
And this error will solve.
11-17-2023 12:23 AM
Thanks for your advice, but it didn't work
As far as I understand, the mngmt port is responsible for DNS, NTP, Smart License and Updates VDB ecc...
And it all works just like that, and lights up green
But it’s not mngnt port that is responsible for ISP/WAN/Gateway, but Outside 1/1, I have it connected to an external IP via NAT
Moreover, the Internet works for clients, the only problem is that it does not turn green and this worries me
The problem arose only after updating the firmware from 6.6 to 7.2.5, no configuration changes were made, but for some reason after the update and reboot there is no more green color
It is still not clear why the cli panel does not resolve dns names
Do you have any other thoughts on this matter?
Thank you
11-17-2023 07:55 PM
It seems that only your ftd is not recognizing name resolutions. Have you set dns servers in your FTD?
11-18-2023 04:30 AM
10.230.50.1
What is this IP?
how mgmt access internet?
11-16-2023 07:52 AM
I only installed this update file, do I need to install anything else?
Cisco_FTD_SSP_FP1K_Upgrade-7.2.5-208.sh.REL.tar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide