About Herald Sison

Herald Sison · 10-16-2024

The goal i want to achieve here based on from the diagram below:i want user1 - 192.168.20.x to pass FG-FW01 192.168.1.1i want user 2 -192.168.50.x to pass FG-FW02 192.168.1.111currently the routing is going to FG-FW01 with static ip route 0.0.0.0 0.0...

Herald Sison · 11-09-2023

Hi Experts,one of our clients are thinking of utilizing their ASA5515X device with FTD7.0.5 via FMC 7.0.5 and they want it for S2S VPN and RAVPN via cisco any connect only so basically all internet traffic will pass from their Sophos firewall.The Sop...

Herald Sison · 10-31-2023

Hi Experts,I hope everyone is doing fine and well. I have this problem with my FTD for more than a month already. I will start this out with what happened at first.I have a ASA5508X hardware running on FTD7.0.6 with FMC 7.3.1.End of September we inst...

Herald Sison · 10-17-2023

Hi All,Anyone experienced with a very intermittent to a random sites especially cisco sites and sometimes some web aps dont work and when we try to ping and tracert to the internet everything is fine and we even tried to remove the firewall and conne...

Herald Sison · 10-15-2023

Hi All,Would you recommend to add 3 Manual Dynamic NAT or may it cause some traffic problems?or Is it ok to use 1 Manual Dynamic and the other 2 are Auto Dynamic?or 3 Auto Dynamic?by the way i have 1 Inside Zone and 1 DMZ zone and i am using PBR Flex...

Herald Sison · 11-14-2024

thank you sir. i ran some test and it seems to working well for now. thank you so much

Herald Sison · 11-13-2024

The VLANs that may be added soon will be this below, these 2 new vlans will be rerouted to the other ISP so we may need a PBR for this one,interface vlan 10ip address 172.20.10.1 255.55.255.0interface vlan 20ip address 172.20.20.1 255.255.255.0 i am ...

Herald Sison · 11-13-2024

This works now sir. Thank you so much. One last thing. if ever i need to add more VLANS, woulde these config below is fine also? access-list 100 deny 172.20.30.0 0.0.0.255 172.20.192.0 0.0.0.255access-list 100 deny 172.20.30.0 0.0.0.255 172.20.1.0 0....

Herald Sison · 10-26-2024

Thank you sir, What do you mean by "have the line as i reference the last line in the acl."You mean i will do this config below?access-list 100 permit ip 172.20.100.0 0.0.0.255 anyaccess-list 100 permit ip 172.21.1.00.0.0.255 anyaccess-list 100 permi...

Herald Sison · 10-25-2024

ive done some checking when the vlan 30 is routed to 172.21.1.111, here are my observations1) vlan 30 users cannot access the internet but can ping 8.8.8.8, and cannot contact our internal dns servers or any other vlans like vlan 50 and or vlan 12) w...

Member Since	‎02-22-2015 07:09 PM
Date Last Visited	‎11-21-2024 02:24 AM
Posts	249
Total Helpful Votes Received	103

User Statistics

User Activity

Split Traffic between 2 Firewall from my Core Switch C3850

How to setup only S2S VPN and RAVPN will pass FTD Device

Traffic Drop to Certain traffic in FTD

SFDataCorrelator, CloudAgent errors in the syslog

NAT for 3 OUTSIDE and 1 INSIDE & 1 DMZ

Re: Split Traffic between 2 Firewall from my Core Switch C3850

Re: Split Traffic between 2 Firewall from my Core Switch C3850

Re: Split Traffic between 2 Firewall from my Core Switch C3850

Re: Split Traffic between 2 Firewall from my Core Switch C3850

Re: Split Traffic between 2 Firewall from my Core Switch C3850