cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1035
Views
0
Helpful
3
Replies

HA FTD 2110 SNMP

I have two FTD 2110 version 7.0.4 configured with HA. I have configured a policy in Devices>Platform settings targeting the HA pair, in order to poll snmp from their Management interface. But during the discovery of the Secondary/Standby device its name shows the Primary/Active FW name is this normal behavior? or is there another way to configure snmp on an HA pair

1 Accepted Solution

Accepted Solutions