07-28-2008 06:06 AM - edited 03-11-2019 06:21 AM
Hi,
I have just created a local account on the ASA with zero priviledge. On the ASDM it says for No ASDM, SSH, Telnet or console access I must configure the AAA authenticate console command.
What/where is this?
08-01-2008 04:56 AM
To enable authentication service for access to the security appliance console over an SSH, HTTP, or Telnet connection or from the Console connector on the security appliance, use the aaa authentication console command in global configuration mode. This command also lets you enable access to privileged EXEC mode. To disable this authentication service, use the no form of this command.
08-01-2008 05:00 AM
What command would it be?
I just need to create a local user with priviledge 0 level and most important doesn't have access to the ASDM, SSH, Telnet, Serial.
08-02-2008 06:25 PM
Hi,
I'm not exactly sure what you are trying to accomplish, but to configure this command you would use the following syntax:
ASA(config)# aaa authentication
You'll want to fill in
enable - for privileged EXEC mode
http - for ASDM
serial - for console access
ssh - for SSH
telnet - for Telnet
Also, here is a link to the command reference for this command:
http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/a1.html#wp1517714
Hope that helps.
-Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide