07-01-2013 08:53 AM - edited 03-11-2019 07:05 PM
Hi,
Can anyone tell me, how can I stop telnet and ping Firewall, and only allow SSH from outside interface. I am setting upp with Zone based Firewall in the router. Attached is config file
Solved! Go to Solution.
07-02-2013 09:45 AM
Hello,
Sorry , Here is the right link
https://supportforums.cisco.com/docs/DOC-34539
Remember to rate all of the helpful posts.
For this community that's as important as a thanks.
07-01-2013 09:39 AM
Hello Sheng,
You mean traffic to the router managment plane right?
If this is the case you have 2 options:
A) Use the self-zone
B) Use an ACL on the outside interface and restrict Incoming traffic
Remember to rate all of the helpful posts.
For this community that's as important as a thanks.
07-01-2013 02:16 PM
Hi, Jcarvaja
Thanks for replied my question. Yes, I want to block telnet and ping traffic from outside to access router
How do I use self-zone in the router.
07-01-2013 02:25 PM
Hello Sheng,
https://supportforums.cisco.com/docs/DOC-34531
Remember to rate all of the helpful posts.
For this community that's as important as a thanks.
07-02-2013 02:46 AM
The above link was not valid..
Not Found
The item does not exist. It may have been deleted
07-02-2013 09:45 AM
Hello,
Sorry , Here is the right link
https://supportforums.cisco.com/docs/DOC-34539
Remember to rate all of the helpful posts.
For this community that's as important as a thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: