11-11-2009 12:49 AM - edited 03-11-2019 09:38 AM
Hi There
Can't find any information regarding this feature, what I have found states that it is a feature, which only is supported when Your context is running in transparent mode, is that true. ???
Thanks in advance.
11-11-2009 08:32 AM
Currently we
only support multicast routing in the single routed mode. It is not
supported in multi-context mode. We do support multicast bridging, but
this would require transparent mode versus routed(only need to allow
multicast traffic via an ACL then). In addition, the
multicast routing is limited to 8 interfaces.
I hope it helps.
PK
11-13-2009 05:29 AM
Hi PK
Thanks for Your reply.
I have recommended 2 approaches to my
costumer.
Ad 1.
Move the clients that are to receive the multicast traffic onto the VLAN with the Multicast servers.
Ad 2.
I can build a setup with a seperat set of PIX hardware to move the multicast traffic onto the costumers secure network.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide