04-22-2013 11:12 PM - edited 03-11-2019 06:33 PM
Hello
I have an old Pix(on ASA 8.0) having a lot VPNs with pre-share keys setup. And it has been too old to find out what those pre-share keys are on any documents. Now I need to replace this PIX with a new ASA. My question is how can I find out those pre-share keys, so I can setup same VPNs on the new firewall and make it plug-and-play. Any way I can export then import those VPN pre-share keys from the old PIX to the new ASA? Or export and import whole configuration, but hardware are different.
How can I setup same VPN pre-share keys as the that of the old Pix on the new ASA?
Thanks a lot.
Wei
Solved! Go to Solution.
04-22-2013 11:16 PM
Hi,
You can use this command
more system:running-config
It will show all the Pre Shared Keys in clear text
Hope this helps
- Jouni
04-23-2013 07:38 AM
Kudos Jouni.
Rhienwie, you can also choose the option when backing up from ASDM.
(Click on image for bigger view.)
04-22-2013 11:16 PM
Hi,
You can use this command
more system:running-config
It will show all the Pre Shared Keys in clear text
Hope this helps
- Jouni
04-23-2013 12:48 AM
Magic
Thanks a lot.
04-23-2013 07:38 AM
Kudos Jouni.
Rhienwie, you can also choose the option when backing up from ASDM.
(Click on image for bigger view.)
04-23-2013 04:13 PM
thanks a lot. gratitude
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide