Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Dear All,I am trying to establish an IPsec tunnel between two ASA but is it not working, the first phase ISAKMP itself not coming up, I checked all the documentation and every thing but still not able to solve the issue.Below is the Configuration of ...

Hello Everyone,This is my first post so please forgive me if I miss something. I have an ASA5512 running 8.6(1)2 that I am trying to NAT a public IP address from my ISP to multiple phone systems on the inside of my network. One of these phone systems...

jadragna1 by Community Member
  • 1811 Views
  • 1 replies
  • 0 Helpful votes

Hello Experts,I want to create a custom-signature to block all TELNET traffic going across my IOS IPS. I tried alot but it didnt work for me. i created a sig with String-Tcp engine > added regex and telnet port=23  but it does not work.can any one he...

Hello Experts,I just configured the remote VPN which is working fine and the pool IP addresses that I'm using for remote VPN, are added to access the firewall through inside interface via Asdm and ssh but when I connect with VPN then neither I'm able...

ray_stone by Level 7
  • 499 Views
  • 1 replies
  • 0 Helpful votes

I'm new to ASA's and I am trying to configure two new ASA's.  Right now, I can't ping/browse to any URL's from the inside networks/interface.  I can ping from the external though.  I have verified that the traffic is allowed.  I'm getting a SYN Timeo...

Hi,In ASA firewall,Inside --- interface gi0/0---- IP address 10.10.20.20/24(LAN)Outside1 --- interface gi0/1 ---- IP address 100.100.100.1/25 (ISP1)Outside2 --- interface gi0/2 --- IP address 200.200.200.1/25 (ISP2) Pool (200.200.200.1 -100)Customer ...

I have misstyped a static route (netmask is wrong) and cannot delete:gw-kuvasz#sh run | include route......route alba-dmz 0.246.102.79 25.255.255.255 10.63.201.110 1......If I try to remove get the following error message:gw-kuvasz(config)# no route ...

sorosj by Community Member
  • 6085 Views
  • 3 replies
  • 0 Helpful votes

HiWe have configured cisco fwsm with below configuration for failover failoverfailover lan unit primaryfailover lan interface FAILOVER Vlan7failover polltime unit msec 500 holdtime 3failover polltime interface 3failover replication httpfailover link ...

tamil vanan by Community Member
  • 1178 Views
  • 2 replies
  • 0 Helpful votes

Hello Experts,In Cisco cloud web security, is there is anyway by whcih i can get system messages of it. I'm aware of scansafe admin portal, but over there apart from reporting functionality is there any way by whcih i can get log of it. for example a...

Review Cisco Networking for a $25 gift card