cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1354
Views
0
Helpful
1
Replies

How to configure BGP on ASA 5510 Version 9.1(7)6

Rickyccnp2020
Level 1
Level 1

Trying to configure BGP on my ASA 5510  at my home lab, but not finding the option for BGP under router configuration .

 

Cisco Adaptive Security Appliance Software Version 9.1(7)6
Device Manager Version 7.4(1)

Compiled on Tue 05-Apr-16 13:23 by builders
System image file is "disk0:/asa917-6-k8.bin"
Config file at boot was "startup-config"

ASAFW up 2 days 14 hours

Hardware: ASA5510-K8, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz,
Internal ATA Compact Flash, 256MB
Slot 1: ATA Compact Flash, 128MB
BIOS Flash AT49LW080 @ 0xfff00000, 1024KB

Encryption hardware device : Cisco ASA-55xx on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode : CNlite-MC-SSLm-PLUS-2.08
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.09
Number of accelerators: 1

0: Ext: Ethernet0/0 : address is 0018.73d7.0244, irq 9
1: Ext: Ethernet0/1 : address is 0018.73d7.0245, irq 9
2: Ext: Ethernet0/2 : address is 0018.73d7.0246, irq 9
3: Ext: Ethernet0/3 : address is 0018.73d7.0247, irq 9
4: Ext: Management0/0 : address is 0018.73d7.0248, irq 11
5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5

Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 50 perpetual
Inside Hosts : Unlimited perpetual
Failover : Disabled perpetual
Encryption-DES : Enabled perpetual
Encryption-3DES-AES : Enabled perpetual
Security Contexts : 0 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : 250 perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Enabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
Cluster : Disabled perpetual

This platform has a Base license.

Serial Number: JMX1049K0MS
Running Permanent Activation Key: 0xf831d274 0x70ace899 0xe94209e0 0xfe78f89c 0x471de4a4
Configuration register is 0x1


ASAFW(config)# router bgp 100
^
ERROR: % Invalid input detected at '^' marker.
ASAFW(config)# router ?

configure mode commands/options:
eigrp Enhanced Interior Gateway Routing Protocol (EIGRP)
ospf Open Shortest Path First (OSPF)
rip Routing Information Protocol (RIP)

 

1 Reply 1

Hi,

It looks like BGP support was added from ASA 9.2

https://www.cisco.com/c/en/us/td/docs/security/asa/asa92/release/notes/asarn92.html

 

Unfortunately there does not appear to be a 9.2 upgrade for the ASA 5510, 9.1.7 is the latest.

 

HTH

Review Cisco Networking for a $25 gift card