07-27-2015 12:00 AM - edited 03-11-2019 11:20 PM
Hi,
I would like to ask how to configure Cisco ASA 5512 er 9.2 nat for translation.
nat-control and global etc is not working.
any idea?
thanks
07-27-2015 12:17 AM
Here is a document that shows the pre 8.3 and relative post 8.3 nat examples and should be helpful here:-
https://supportforums.cisco.com/document/33921/asa-pre-83-83-nat-configuration-examples
Regards,
Dinesh Moudgil
P.S. Please rate helpful posts.
07-27-2015 01:19 AM
For a fast setup:
object-group network public_ip
network-object host x.x.x.x
object-group network private_ip
network-object host y.y.y.y
nat (insid,outside) source static private_ip public_ip
or
nat (inside,outside) source static any interface
for additional info, check the doc from previous post,
Traian
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide