Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm attempting to setup an SDWAN lab, but it seems that no attempts have been made to establish the control connection between the controllers even after installing the certificate? any suggestion?
Version: 20.9.2.1
Devices Controller:
Devices Certi...
I'm experiencing a problem where it appears that packets are unable to be properly processed when traffic for conferencing passes via the Cisco 8500. Another thing is that when I run a packet trace, It seem to be unable to resolve the output interfac...
Although I've seen multiple cases of clients becoming stuck in "DHCP REQD," in my case, it appears from the debug output that there have been no discovery or BOOTREQUEST from the client (which should be?).
We are using 8.0.152.0, I want to find out...
From the topology it shows that point to point connection between the local site CE router and the PE router. The setup is that the "ip helper x.x.x.x" is placed on the core switch SVI, then it is forwarded to the CE, PE, and MPLS network. simple set...
Hi All,I was tasked to migrate our client's core switch from their Catalyst 4500 to the new 9500 series. The current setup is they have 2 physical switches installed on different Building (A & B), they also have an existing fiber link between buildin...
@Giuseppe Larosa I appreciate your input.
1. Post the firewall filter configuration on the Juniper PE Side. = At first, we assume Juniper could be the culprit, but after reviewing the configuration and settings, we find that there is no blocking ...
CE knows how to reach the DHCP server. no issue in terms of reachability the only problem is the DHCP services between relay and server which hosted in DC.
@balaji.bandi ,That's correct, They have a couple of access switches which have dual uplink. Indeed, with Stackwise virtual they can have an active/active setup so that traffic or communication which is within Building B will be processed by Core SW...
