03-15-2016 02:38 PM
Hi everyone
I'm looking for a way to monitor traffic by ip address from my FireSight, we have an ASA5516X with firepower services.
Hope you can help me with this.
Best regards
Solved! Go to Solution.
03-17-2016 07:49 AM
Hi
You can do it from your firesight.
Just navigate to connection events and filter out the IP address you want to see or it will just show all the IP's
Or you can navigate to dashboard and there are plenty of graphs which can help you.
Hope the 5516 is being manged by the firesight.
Let me know if it helps.
Thanks
Yogesh
03-17-2016 07:49 AM
Hi
You can do it from your firesight.
Just navigate to connection events and filter out the IP address you want to see or it will just show all the IP's
Or you can navigate to dashboard and there are plenty of graphs which can help you.
Hope the 5516 is being manged by the firesight.
Let me know if it helps.
Thanks
Yogesh
04-13-2016 10:17 AM
Thank you for the reply.
Actually, I was looking this option, but it was empty. What I needed was to enable logging on the access-rules.
Regards
04-14-2016 07:42 AM
Hi,
To enable logging , you need to go to : Policies >Access control policy , Edit the policy being used . Edit the rule for which you want to enable logging and then go to Logging >Beginning of connection.
Regards,
Aastha Bhardwaj
Rate if that helps!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide