How to Publish my Web Server

[David Aguirre]

Hello!

I'm configuring a Cisco ASA 5505 ASA Version 8.3.1

I want to publish my web server is in the DMZ (10.30.30.1) and server address is 10.30.30.30 but it still fails.

I have only one public IP, and hope that when they call the Public IP, my web server appears, another problem I have is that when I assign the public IP to my interface OUTSIDE my LAN loses internet connection.

I have to do to publish my web server and the LAN computers have internet access?

Thank you very much for the help.

[Jouni Forss · Accepted solution]

Hi,

If you want to try a Static NAT configuration to be able to reach the Web server with public IP address from the "inside" you could try this configuration

object network WEB-SERVER-TO-INSIDE

host 10.30.30.30

nat (dmz,inside) static

Note that after the above command the Web server should be visible to the "inside" with only the public IP address, not the private IP address.

See if this works

- Jouni

[David Aguirre]

Hi JouniForss!

The above mentioned

It was the right thing and works perfectamentte

Thank you very much for all the help.