02-12-2013 11:29 AM - edited 03-11-2019 05:59 PM
Hello!
I'm configuring a Cisco ASA 5505 ASA Version 8.3.1
I want to publish my web server is in the DMZ (10.30.30.1) and server address is 10.30.30.30 but it still fails.
I have only one public IP, and hope that when they call the Public IP, my web server appears, another problem I have is that when I assign the public IP to my interface OUTSIDE my LAN loses internet connection.
I have to do to publish my web server and the LAN computers have internet access?
Thank you very much for the help.
Solved! Go to Solution.
02-20-2013 08:53 AM
Hi,
If you want to try a Static NAT configuration to be able to reach the Web server with public IP address from the "inside" you could try this configuration
object network WEB-SERVER-TO-INSIDE
host 10.30.30.30
nat (dmz,inside) static
Note that after the above command the Web server should be visible to the "inside" with only the public IP address, not the private IP address.
See if this works
- Jouni
02-22-2013 10:38 AM
Hi JouniForss!
The above mentioned
It was the right thing and works perfectamentte
Thank you very much for all the help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide