03-25-2021 02:36 PM
Hi Gents,
I have my two Cisco ISE nodes deployed, just waiting the licenses from reseller.
Can you advise how to set one PAN as primary and the other as secondary.
Thanks,
Edouard.
Solved! Go to Solution.
03-25-2021 02:45 PM
Hi,
- On the Secondary PAN, export the admin certificate and import to the trusted certificate store on the Primary PAN.
- On the node you wish to be the Primary PAN goto Administration > System > Deployment and edit the node, change to Make Primary.
- On the Primary PAN goto Administration > System > Deployment and clicik Register an ISE node - enter the FQDN on the Secondary PAN. When prompted select which personas to assign to the new node.
HTH
03-25-2021 02:45 PM
Hi,
- On the Secondary PAN, export the admin certificate and import to the trusted certificate store on the Primary PAN.
- On the node you wish to be the Primary PAN goto Administration > System > Deployment and edit the node, change to Make Primary.
- On the Primary PAN goto Administration > System > Deployment and clicik Register an ISE node - enter the FQDN on the Secondary PAN. When prompted select which personas to assign to the new node.
HTH
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: