I don't have "ASA FirePower Configuration" menu in ASDM

[boris.majstorovic]

Hi

I don't have "ASA FirePower Configuration" menu in ASDM.

I have already configured IP to management 0/0 port 10.226.24.181 also to SFP manager 10.226.24.130.

I can ping 10.226.24.130 from ASA CLI and have tab in ASDM (with https://No DC Configured in the button).

You can see in attachment

Please HELP

[Marvin Rhoads · Accepted solution]

You have an ASA 5525-X and the FirePOWER module is 5.3.1-152. To manage the FirePOWER module on that platform via ASDM requires the module be running 6.0 or later software (and your ASDM must be 7.5(1.112) or later).

Reference: http://www.cisco.com/c/en/us/td/docs/security/asdm/7_5/release/notes/rn75.html#pgfId-156844

If you want to upgrade the module from 5.3 to 6.0 and don't have FirePOWER Manager, then the path to take is to reimage it using the 6.0 boot and system images. that procedure is shown here:

http://www.cisco.com/c/en/us/support/docs/security/asa-firepower-services/118644-configure-firepower-00.html

You will need the images available here:

https://software.cisco.com/download/release.html?mdfid=286271172&flowid=77244&softwareid=286277393&release=5.4.0.8&relind=AVAILABLE&rellifecycle=&reltype=latest

Expand the tree on the left and look under All Releases > 6.0 > 6.0.0. Use the files asasfr-5500x-boot-6.0.0-1005.img and asasfr-sys-6.0.0-1005.pkg.

After you get it working, you should also update further the the most recent point release (currently 6.0.1).

[atulpalsinghsaini6492]

i have the same version of firemodule 5.3.1-152 and my asa is 5512 with asdm version of 7.3. is the same solution?