Hello experts,
I need your help on the below issue.
I have ASA 5510 installed with ASA ssm 10 IPS module. This module was faulty and got today RMA from Cisco. It comes with the below image pre-installed.
sensor# sh ver
Application Partition:
Cisco Intrusion Prevention System, Version 5.0(2)S152.0
OS Version 2.4.26-IDS-smp-bigphys
Platform: ASA-SSM-10
Serial Number: JAF114604ES
No license present
Sensor up-time is 41 min.
Using 472633344 out of 1054670848 bytes of available memory (44% usage)
system is using 17.3M out of 29.0M bytes of available disk space (59% usage)
application-data is using 35.6M out of 166.8M bytes of available disk space (23% usage)
boot is using 40.5M out of 68.6M bytes of available disk space (62% usage)
MainApp 2005_Mar_04_14.23 (Release) 2005-03-04T14:35:11-0600 Running
AnalysisEngine 2005_Mar_29_16.33 (Release) 2005-03-29T16:45:11-0600 Running
CLI 2005_Mar_04_14.23 (Release) 2005-03-04T14:35:11-0600
Upgrade History:
IDS-K9-sp-5.0-1.2- 09:00:00 UTC Thu Mar 17 2005
Recovery Partition Version 1.1 - 5.0(2)
I like to upgrade it to IPS-SSM_10-K9-sys-1.1-a-7.0-1-E3.img because another primary ASA module has the same image running.below is the exsisting working module image. shall i use the sensor cli cmd "upgrade " TO UPGRADE IT. If not pls give the steps for the upgrade.
Primary ASA# sh module 1 details
Getting details from the Service Module, please wait...
ASA 5500 Series Security Services Module-10
Model: ASA-SSM-10
Hardware version: 1.0
Serial Number: JAF1335AMJP
Firmware version: 1.0(11)5
Software version: 7.0(1)E3
MAC Address Range: 0026.0bde.4318 to 0026.0bde.4318
App. name: IPS
App. Status: Up
App. Status Desc:
App. version: 7.0(1)E3
Data plane Status: Up
Status: Up
Mgmt IP addr: 192.168.197.198
Mgmt web ports: 443
Mgmt TLS enabled: true