IDSM-2 Recovery

[networker99]

We have IDSM-2 modules in various 6509's, after an signature update the sensor has crashed.  A module reboot does not resolve.  Recommendation from TAC was to hardware reset the modules and reconfigure from scratch.  Can anyone tell how to (or point me in the right direction).. how to do this.. thanks

[rhermes]

Here you go:

http://www.cisco.com/en/US/docs/security/ips/6.2/installation/guide/hw_installing_idsm2.html#wp724109

- Bob

[networker99]

Sorry if I wasnt clear.. I need to do a hard reset so the config is wiped from the module.. not just reset it.

[rhermes]

http://www.cisco.com/en/US/docs/security/ips/6.2/installation/guide/hw_system_images.html#wp1031426

- Bob