06-10-2019 04:03 PM
Hi all,
When i try to install the FirePOWER software on Cisco ASA 5516-X and i issue the following command:
ASASFR-boot> system install ftp://192.168.2.4/asasfr-sys-6.2.2-81.pkg
It gives the following:
Verifying
110
Upgrade aborted
When i ping the address 192.168.2.4 normally, it replies, but inside the (ASASFR-boot>) it is not replying.
I configured the system with IPv4 address/mask, default gateway and DNS information, don't know what is missing.
Thanks in advance.
Khaled Omar
Solved! Go to Solution.
06-16-2019 08:37 PM
Try
sw-module module sfr recover stop
06-16-2019 08:55 PM
This worked, thanks
Now i booted from the new boot image and it is in the "Recover" status, waiting until it move to "Up".
06-16-2019 09:28 PM
Why it is not moving to the "Up" status and stops at the "Recover" status?
Should I start the system installation on the "Recover" status?
06-16-2019 10:59 PM
Yes - go ahead and proceed with installation (and, subsequently, configuration) of the system pkg file once the image recovery has returned a command prompt to the console output.
The module won't move to "Up" until after you have successfully completed the system installation phase.
06-16-2019 11:03 PM
I proceeded with the installation and still giving the same error:
Verifying
110
Aborted
I use quick and easy FTP server, do you recommend a specific FTP server that can be used easily?
06-17-2019 05:13 AM - edited 06-17-2019 05:13 AM
I use FileZilla ftp server.
https://filezilla-project.org/download.php?type=server
I've used it hundreds of times with no problems for ASAs, Firepower service modules, and many other target devices.
06-17-2019 05:16 PM
still giving the same error :S
06-17-2019 06:58 PM
It's possible that your SSD is bad. If you have TAC support I'd go ahead and open a case.
06-17-2019 07:17 PM
I have the following:
Details for TAC: End Customer: CLIFTON OPERATIONS PTY LTD - Sub141457 - Web Order# 82835912 - Active Contract Number#201372456
Can you take this case as you know its details.
06-17-2019 08:15 PM
I'm neither Cisco TAC nor a Cisco employee, just helping out fellow users to the best of my ability.
You're posting here at Cisco Community. The community is not the same as paid Cisco support (TAC) and is not associated with the TAC.
To open a TAC case, go to https://mycase.cloudapps.cisco.com/
06-17-2019 10:25 PM
Ok, Thanks for your co-operation.
02-18-2020 05:16 PM
what was your outcome in the end?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide