Solved: IPS Module - ASA 5585x

mohammad_omran · ‎07-22-2012

Dears

I have configured the IPS module with Setup command and have initialized it , but when i tried to access the IPS via ASA ASDM and saving any change it keeps telling me that i do not have sufficient rights ??

Please check the attached and advise what is causing this case??

Karsten Iwen · ‎07-22-2012

You connect with a user "admin". But this user only has "viewer"-rights. Log into the sensor with the default-user "cisco" and the password you provided when first logging in, and change the user-role of the user "admin" to "Administrator".

--
If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

View solution in original post

Karsten Iwen · ‎07-22-2012

You connect with a user "admin". But this user only has "viewer"-rights. Log into the sensor with the default-user "cisco" and the password you provided when first logging in, and change the user-role of the user "admin" to "Administrator".

--
If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.