Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
419
Views
0
Helpful
2
Replies

IPS on 2811 router with 2 ISP

mihaid
Level 1
Level 1

‎03-01-2006 08:57 PM - edited ‎03-10-2019 01:54 AM

I have an 2811 router with 2 eth0/0 and eth0/1 for bgp with ISP 1 AND ISP 2. When IPS is enabled on eth0/0 everthing is ok, but when IPS IS enabled also on eth0/1, I can't receive emails from outside, our web servers cannot be accesed. can I receive some answers? thank you

Labels:
0 Helpful
2 Replies 2

Jeffrey Bollinger
Cisco Employee
Cisco Employee

‎03-02-2006 05:50 AM

Are you certain that your traffic is not taking an asymmetric path? Its possible that the IPS will be blocking what it believes to be malformed TCP traffic if it sees SYNs and ACKs from a single stream coming in from an unexpected interface/direction. Be sure there's no asymmetric routing that the IPS would have to inspect and that you are inspecting in the correct direction.

0 Helpful

mihaid
Level 1
Level 1
In response to Jeffrey Bollinger

‎03-02-2006 08:34 AM

Hi

Thank you, but I don't think so(no traffic taking asymmetric path).

But I will atttach the running config and please check, and let me know.

regs

Michel

25135-SDMConfig 03 martie 2006
0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking for a $25 gift card