05-21-2007 06:37 AM - edited 03-10-2019 03:37 AM
Hi there, I have a ipsmc 2.2 sp 2 and trying to upload a sensor v. 5.1(4), I receive the issue "Import failed due to exceptionError importing configuration files from sensor- Unable to get sensor version. Sensor may not be reachable". But looking to the versions supported i can find the last one is version 5.1(1). How to increase the supportable version?
Thanks
05-21-2007 07:23 AM
Hi,
IPS MC 2.2 supports 4.x and 5.x sensors. It supports 5.1(4).
Make sure your sensor is reachable from IPS MC server machine.
05-21-2007 07:34 AM
Hello,
trying to connect from the VMS server via telnet to the sensor I have no problems. I connect to the pix address and then, by a NAT address I access the ids.
But trying to add the sensor getting its configuration through the device import, I receive that issue. And trying to add a standard configuration, it happens as well.
Regards
05-21-2007 07:37 AM
Did you use MC to download the IPS-K9-sp-5.1-4.zip package from CCO? If you had upgraded your sensor to 5.1.4 outside of MC then you will still need to download the zip pkg so that MC knows about the 5.1.4 version.
If you have done this and still can't import the sensor then look for errors on the sensor:
- error events from "show events err past 00:30" (past 30 min)
- or error logs in the main.log file from "show tech" output
05-22-2007 04:27 AM
Thanks, Jamesand, I'm checking for this pkg.
Regards
05-22-2007 05:06 AM
Hi Leo,
Its best to upgrade your IPS to 5.1(5)E1 engine as the signature support for 5.1.4 is being stopped. So its best to get your IPS sensor upgraded to 5.1(5)E1.
-Hoogen
Do rate if you find this post helpful
05-25-2007 05:26 AM
Ok... it was a signature problem. Thanx a lot! :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide