10-04-2020 07:08 AM
Hi I need to install ISE in attached USB drive because the drive c is not big enough. vmware workstation is used as platform in my drive c. but during i install the ISE and let ISE install in the USB drive(500G), I got error message, which tells the installation cannot be in the USB. Is it possible to install ISE in attached USB drive? Thank you
Solved! Go to Solution.
10-04-2020 06:45 PM
You may be able to get things to work in an unsupported platform but they may break unexpectedly or work in inconsistent ways - as you are experiencing.
If you have a working ISE configuration, you should be able to perform a backup and restore it to another deployment as long as the version is compatible.
10-04-2020 07:28 AM
ISE is not supported on VMware workstation, only on ESXi (with regard to VMware). Here are the current supported VMware platforms:
10-04-2020 09:00 AM
ISE in my vmware workstation can work in drive c or d, maybe it is earlier version.
If i move it to ESX, all past config can keep the same?
10-04-2020 06:45 PM
You may be able to get things to work in an unsupported platform but they may break unexpectedly or work in inconsistent ways - as you are experiencing.
If you have a working ISE configuration, you should be able to perform a backup and restore it to another deployment as long as the version is compatible.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide