12-09-2021 06:38 AM
So I recently migrated a site from an 891 to an 1111-8P. But since then I have been unable to access a VOIP gateway in the ZBF DMZ on the router.
I can ping the GW & log into it from the LAN locally and the NATed IP of the gateway shows in the ARP table. But I can no longer connect to the GW from the outside world and I can't ping it either ( which we could on the old config ).
The site can also no longer make outbout calls via thw GW.
We regually migrate 891's to 1111-8P's without any issues, but none before have had a DMZ and I have tried everthing I can within ZBF, removing self zones, allowing IP any any in the ACLs etc.
There have been no changes to any external IPs and the local ISP can't ping the NAT either.
Has anyone else come across issues with multiple Zones on 1111-8's ?
12-09-2021 07:44 AM
Hi @Richard Tapp can you provide your full configuration for review?
Do you have NAT configured that could unintentially be translating traffic from the internal LAN to the DMZ network?
12-09-2021 08:05 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide