Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
596
Views
0
Helpful
2
Replies

Issue with FWSM configuration

Go to solution
nonyebuchi
Level 1
Level 1

‎05-13-2011 05:21 AM - edited ‎03-11-2019 01:32 PM

After configuring the FWSM i have issues pinging the laptops on the attached file from each other. Please any help on what is wrong and possible solution is appreciated. Attached is also the config file.

Nnamdi

Labels:
Preview file
22 KB
86291-config_fwsm.txt.zip
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
brquinn
Level 1
Level 1

‎05-13-2011 06:45 AM

Nnamdi,

You need access-group commands on all your interfaces and you should also configure the icmp command to allow pings to/from your FWSM interfaces.

Ex:

icmp permit any inside

icmp permit any shared

icmp permit any outside

Thanks,

Brendan

View solution in original post

0 Helpful
2 Replies 2

Go to solution
brquinn
Level 1
Level 1

‎05-13-2011 06:45 AM

Nnamdi,

You need access-group commands on all your interfaces and you should also configure the icmp command to allow pings to/from your FWSM interfaces.

Ex:

icmp permit any inside

icmp permit any shared

icmp permit any outside

Thanks,

Brendan

0 Helpful

Go to solution
nonyebuchi
Level 1
Level 1
In response to brquinn

‎05-13-2011 08:32 AM

Thanks Brendan,

I can ping through now after the configurations.

Regards,

Nnamdi

0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking for a $25 gift card