Juniper to Cisco ASA

[cisco.plus]

Hi 2All

We are moving from Juniper Firewall to Cisco ASA.

Are there any config migration tool from juniper to Cisco.

Are there any cisco ASA simulator to get some hands on.

Is it recommended to have 8.3 or 8.2 software version on ASA

Any recommended books on ASA having simple/complex scenarios

thanks in advance.

CP

[Jigar Dave]

Hi CP,

can you provide details of Juniper device like platform, model, ( Junos based or NSM based) ?

to which ASA model you want to go for .. details of ASA model would be appreciated.

-Jigar

[prasaathd181990]

Hi I a also looking for migration tool to convert the config from juniper to Cisco.

juniper srx 6000 series  to Cisco 4145

[sean_evershed · Accepted solution]

- Are there any config migration tool from juniper to Cisco.

If you search the Netpro forum there are a few discussions on how to do this. See below a recent example:

https://supportforums.cisco.com/message/3239344#3239344

- Are there any cisco ASA simulator to get some hands on.

You can emulate an ASA under Dynamips. However you may be better off renting time from one of the rack rental companies since you will not get all the features.

- Is it recommended to have 8.3 or 8.2 software version on ASA

If you are new to ASAs then go for the latest version.

Any recommended books on ASA having simple/complex scenarios

- Check out Cisco Press: http://www.ciscopress.com/bookstore/product.asp?isbn=1587058197

Please remember to rate posts that are helpful.

[cisco.plus]

Sean

Thanks a lot mate for the reply.

Best Wishes

CP

[Anand Kanani]

Here is the new self-service tool that Cisco has released to convert to any vendor firewalls to Cisco ASA.

Currently it supports Juniper ScreenOS to Cisco ASA conversion. More of them are coming soon.

Link to the original post:

https://supportforums.cisco.com/community/netpro/security/firewall/blog/2013/09/27/conversion-tool-juniper-screenos-to-cisco-asa

Link to the tool itself:

https://fwmig.cisco.com