cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
561
Views
0
Helpful
5
Replies

limited Access to ASA 5506-X

zelguesmi2
Level 1
Level 1

Hi,

SORRY FOR MY ENGLISH

 

I have recently a CISCO ASA  5506-X , after I pluged cables ( power and Ethernet ) I taper in my browser https://192.168.1.1 an interface named "Fire power device manager  " appear I tape the login and password and I have acces to the interface correctly but my problem is I want to access with ASDM but I cant whene I tape https://192.168.1.1/admin its redirects me to the firepower page 

I connect with the console its ask me for the login and password I tape de same of the firepower interface I can access but its not the interface how is I knowed :

 

MYFW login: admin
Password:
Last login: Wed Nov 15 21:13:12 UTC 2017 on ttyS1

Copyright 2004-2017, Cisco and/or its affiliates. All rights reserved.
Cisco is a registered trademark of Cisco Systems, Inc.
All other trademarks are property of their respective owners.

Cisco Fire Linux OS v6.2.2 (build 11)
Cisco ASA5506-X Threat Defense v6.2.2 (build 81)

>

I cant tape enable command !!! and I cant reset it neither with the button nor with console

 

thx for your help i'm bloked 

thx

5 Replies 5

mikael.lahtela
Level 4
Level 4

mikael.lahtela
Level 4
Level 4
Hi,

You are using Firepower Threat Defense Image, you should use FDM for management.

https://www.cisco.com/c/en/us/td/docs/security/firepower/622/fdm/fptd-fdm-config-guide-622/fptd-fdm-get-started.html

br, Micke

Hi ,

 

thx for your replay ,

 

 

So how Can I connect on it with the ASDM interface 

Is there on it the ASA image to use it ?

 

thx in advance

 

thx

 

this is helpful 

Review Cisco Networking for a $25 gift card