10-23-2011 05:29 AM - edited 03-11-2019 02:41 PM
Hello Sat Shri Akal,
Can any one help me about logging of FWSM context logs to two diffrent zone SYSLOG SERVER and SYSLOG Collector
in CSM 3.2.2. I am able to have logs from Admin context but not from my other context of FWSM. Otherwise that context is sending syslogs to ONE syslog server in similsr vlan,but why that perticular context is not able to log ay syslog collector of CSM which is having logs from admin context. Please help me in this case.
regards
10-30-2011 06:04 AM
Pradeep,
All contexts should be able to reach the CSM server's IP address just like the admin context.
The individual contexts should be configured to send logs to the CSM server's IP address.
From CSM go under each context and add management IP address for the particular context.
Once the above is done you will see logs from all the contexts under CSM.
-Kureli
06-03-2013 02:29 PM
Can you set up 2 different SYSLOG servers, one on the inside and the other on a different interface?
We have this set up and the syslog traffic is not reaching the syslog server that is not on the inside.
The server is directly attached to the firewall off of another interface.
-Scott
06-03-2013 03:11 PM
Hello,
Yes, you should,
Check if there is basic connectivity,
Can you ping that server?
If you do a capture on the FWSM, do you see the packets leaving?
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide