09-13-2005 05:27 PM - edited 02-21-2020 12:23 AM
Anyone can explain why I have two lines in syslog for every connection build or teardown?
syslog server is Kiwi and I disabled logging standby.
Thank in advance. Alex M.
09-13-2005 07:02 PM
pls note that the logging standby command lets the failover standby unit send syslog messages.
you can specify syslog host,facility and level by below commands :
logging host [in_if_name] ip_address [protocol /port]
logging facility (default is 20 :: LOCAL4)
logging trap level (Set logging level only for syslog messages)
0emergenciesSystem unusable messages
1alertsTake immediate action
2criticalCritical condition
3errorsError message
4warningsWarning message
5notificationsNormal but significant condition
6informationalInformation message
7debuggingDebug messages and log FTP commands and WWW URLs
09-15-2005 02:21 PM
Thank you for reply, mehrdad,
but I have mentioned in initial message that logging standby already disabled.
Any other ideas, anyone?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide