cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1260
Views
0
Helpful
1
Replies
Imran Ahmad
Explorer

MAB Config Issue

with acs 4.2 installed in my network,   PEAP, EAP-TLS, md5... authentications work normally.  But Mac-Based-Authentication   doesnt work at all.  i tested every thing but no luck .

This is what i have setup on Swith for MAB:

aaa new-model

aaa authentication login default none

aaa authentication dot1x default group radius

radius-server host 192.168.2.16 auth-port 1645 acct-port 1646 key cisco

!

dot1x system-auth-control

!

interface FastEthernet0/1

switchport mode access

dot1x pae authenticator

dot1x port-control auto

dot1x mac-auth-bypass

On ACS server, i created Netword-Profile for MAB, i added those Agentless hosts mac-adds,   Even i created User-Name&password by those Agentless hosts mac-adds on acs,   ..... still nothing seems to be working.   i have selected ACS_Internal-Database for mac authentication.

On ACS while i check the   Failed-attempt log, nothing is logged there.  i dont know where is the issue.

Please tell me where im wrong on my config?

1 REPLY 1
jw.sl9
Beginner

Under your interface type: mab

Sent from Cisco Technical Support iPad App


I hope you find this information useful, if it was satisfactory for you, please mark the question as Answered. Please rate post you consider useful. -James
Content for Community-Ad