management-acces on Router 3825 via VPN (snmp)

[nvanhaute]

Hi,

I'm using "management-access" command on all PIX I manage to get snmp info from ipsec tunnel (management-access inside) => no problem

Now I'm new with router conf, and I did not find the same command to do that.

So how to access inside interface from VPN... and in my case to get snmp info ?

thanks by advance

Regards

Nicolas

[Farrukh Haroon]

By default there is no access-control on the router. You can snmp poll 'ANY' interface from anywhere. Unless you are running some firewall type feature on the router.

Farrukh