Hi,
I have a new IPS-4240 were I cant get the managmet port to work, no green LED's.
The port is connected to a Catalyst 3750 and i have tried to change cabel and port, but with no luck.
I do get to set IP address on the interface, and I can ping my self, but not out to the def.gw.
Anyone seen this? Or have any tip on what to check before I call my rep.
-----------------------------------------------------
IPS_1# ping 172.16.30.200
PING 172.16.30.200 (172.16.30.200): 56 data bytes
64 bytes from 172.16.30.200: icmp_seq=0 ttl=64 time=0.0 ms
64 bytes from 172.16.30.200: icmp_seq=1 ttl=64 time=0.0 ms
64 bytes from 172.16.30.200: icmp_seq=2 ttl=64 time=0.0 ms
64 bytes from 172.16.30.200: icmp_seq=3 ttl=64 time=0.0 ms
--- 172.16.30.200 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.0/0.0/0.0 ms
IPS_1#
IPS_1#
IPS_1#
IPS_1#
IPS_1#
IPS_1# sh interfaces brief
CC Interface Sensing State Link Inline Mode Pair Status
GigabitEthernet0/0 Disabled Down Unpaired N/A
* Management0/0 Disabled Down
GigabitEthernet0/1 Disabled Down Unpaired N/A
GigabitEthernet0/2 Disabled Down Unpaired N/A
GigabitEthernet0/3 Disabled Down Unpaired N/A
IPS_1#
Regards Mikael