Missing Interface

[moconnor]

I'm starting to configure my new ASA5510. Even though there are 4 Ethernet0 ports in back (Ethernet0/0 through Ethernet0/3), in ASDM, Configuration, Interfaces, I only see Ethernet0/0 through Ethernet0/2 and Management0/0. It does not allow me to add another port.

Where is my fourth Ethernet0 port?

[Syed Iftekhar Ahmed · Accepted solution]

You need "Security Plus" license to get more than 3 interafces.

http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd80402e36.html

Syed