NAC Depolyment for wireless network

[vicente.madrigal]

Hi all,

I am planning to implement a NAC appliance server in one of our customers. The wired LAN is based on cisco catalyst switches and there is going to be a wireless LAN with one Wireless LAN controller and about 25 access points (all Cisco equipment). I am planning and out of band virtual gateway deployment and I wolud like to know if it is possible to control both the wired LAN and the wireless network with the same NAC CAS server  or if I need one NAC CAS server for the wireless and one for the wired LAN.

Regards

[Faisal Sehbai · Accepted solution]

Vicente,

You can as long as the Wireless is L2 adjacent, you can use the same CAS for OOB Wired and Wireless.

HTH,

Faisal

--

If you find this post helpful, please rate so others can find the answer easily