Hi There,
I have a 4507R core Switch running IOS version 12.2(31). I am trying to configure this switch for Clean Access; I have already configured the ACS server but when configuring the switch as a NAD and apply the "ip admission NAC" command on the interface level, I get the following error message:
% This config is not supported on this platform. Try configuring a new rule.
The NAC configuration I entered on the switch is as follows:
Switch(config)=ip access-list extended Interface_ACL
Switch(config-nacl)=permit udp any any eq 21862
Switch(config-nacl)=permit udp any any eq domain
Switch(config-nacl)=permit udp any any eq bootpc
Switch(config-nacl)=permit udp any any eq bootps
Switch(config-nacl)=permit tcp any host (antivirus ip address)
Switch(config)=ip admission name NAC eapoudp
Can somebody clarify to me the meaning of that error message and assist me whether my NAC configuration is alright?
Thanking in advance.
Regards,
Haitham
