02-24-2010 04:30 AM - edited 02-21-2020 03:53 AM
Folks, I am
configuring the NAC CAM 4.7.1 and I created two roles, Employ1 and
Employ2 but when that roles are into posture assessment with CCAA (Clean Access Agent) I saw that role Employ1 fall in Temporary role and Employ2 fall in Unauthenticated role, I don't know why that difference.
I want to put each profile with a specified quarantine role, How can I do this?
thanks a lot
02-25-2010 09:26 AM
Daniel,
If using the agent, they go in the same quarantine role. It's called the Temporary Role. As for why one is working and the other failing, what sort of requirements are you using with those roles?
Faisal
02-26-2010 05:18 PM
Hi Faisal,
At this moment, role Employ1 is using agent but there is no requeriments setup on role-requeriments and
Employ2 is using agent too and there are six requeriments setuped on role-requeriments.
thanks
02-27-2010 07:19 AM
So which requirements is employ2 failing on? What about employ1?
What do the reports show?
Faisal
02-27-2010 10:28 AM
Hi Faisal,
thanks for your attention.
Well, I saw that when I put requeriments on Employ1 for example WSUS requeriment and the client needs to update, that client fall in Unauthenticate role while Employ2 with the same WSUS requeriment fall in temporary role.
This way I had to generate ACLs in both roles Unauthenticated role and temporary role.
thanks
03-04-2010 11:14 AM
03-05-2010 08:20 AM
Daniel,
Okay I see what you're saying. Go to User Roles, Click on edit for the Temporary Role, and change the drop down for the Role type to Agent Temp Role.
HTH,
Faisal
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide