cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
361
Views
0
Helpful
3
Replies

NAT incoming SSL traffic to inside interface address

Hi All,

I'm trying to NAT the source address of incoming ssl traffic to the physical inside interface. So on the inside network all ssl traffic should be sourced from the inside interface.

Does anyone know if this is possible? I was trying something like this...

interface GigabitEthernet0/0

nameif outside

security-level 0

ip address 172.16.1.1 255.255.255.0

!

interface GigabitEthernet0/1

nameif inside

security-level 100

ip address 10.0.1.2 255.255.255.0

!

global (inside) 1 interface

nat (outside) 1 10.0.2.0 255.255.255.0

!

ip local pool SSL-IP-POOL 10.0.2.1-10.0.2.254 mask 255.255.255.0

!

tunnel-group TEST general-attributes

address-pool SSL-IP-POOL

!

Regards

Hielke

3 Replies 3

andrew.prince
Level 10
Level 10