I have an ASA that is configured with the following...
Inside IP: 192.168.1.0/24
DMZ IP: 188.8.131.52/24
Outside IP: 184.108.40.206/30
*All IPs are fictious of course*
Currently my ASA is configured to NAT all inside IPs to the outside interface. My plan is to change the outside interface to a Private IP address, as I'm looking to put a router infront of it. Instead of NAT'ing to the outside interface, can I NAT to a free IP in my 220.127.116.11/24 block? If so, what would be the desired configuration?
global <?> 1 18.104.22.168.....?...not sure on the syntax. Looking for assistance on that as well