Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

I have a Cisco 2106 wireless controller and trying to install a ACS to autheticate wireless users using Active Directory. I have added the wireless controller to the device groups and set the identity store to use Active Directory. To the Access Poli...

matruji by Level 1
  • 671 Views
  • 1 replies
  • 0 Helpful votes

an asa housing a business application server sends out given syslogs quite often.419002: Duplicate TCP SYN from LOCAL:10.1.1.75/43415 to MILZONE:10.2.90.26/443 with different initial sequence numberthis asa is on version 7.0(6) , cisco says it is com...

suthomas1 by Level 6
  • 1633 Views
  • 2 replies
  • 0 Helpful votes

Howdy IPSers!I am Robert Albach, a new product manager responsible for Cisco's 4200 series IPSs. I would like to invite all interested persons to a brief (@ 30 minute) webinar presentation on Risk Ratings this Thursday October 14th.I hope you can mak...

Hi,I have a some question on Cisco NAC and not sure if it is able to support it:1. Can NAC honor/trust qos packet when it is setup for inband/out of band?2. For creation of lobby admin on management of local guest accounts(using clean access applianc...

I'm running into a issue with traffic. I have a backup location with internet and connected via MPLS. I need traffic to route to the main location. Do I only add default route to the asa to point to the main ASA network?Or do I add a static nat to th...

I have a PIX 506e which I wish to use to access our LAN by VPN. I can  make a VPN connection from inside the LAN but I can't from home (eg  outside of our office network). I guess it may be some simple setting I  have over looked to enable WAN VPN ac...

dbairdpub by Level 1
  • 1325 Views
  • 8 replies
  • 0 Helpful votes

ForumI am working at a Cisco customer site today.  While looking at some configurations on the customer firewall, I happened to notice that the ACL that they have on their WAN interface on the ASA had a permit ip any any at the end of the ACL.  I ask...

Hi all,   Basically I am taking my first stab at configuring a fwsm in a 6509 with a sup 720. The scenerio I need help with is this: I have 2 SVI interfaces coming into my layer 3 switch. I want to pass these 2 SVI interfaces and my ACS local SVI int...

scmeis1 by Level 1
  • 847 Views
  • 4 replies
  • 0 Helpful votes

I need to be able to use the 'inside' IP address of an ASA 5510 (v8.2) as the recognized DNS server configured in TCP/IP settings on internal workstations.I understand that the ASA cannot act as a DNS server, but can the "ip dns server" and "ip name-...

jeff.carr by Level 1
  • 16578 Views
  • 6 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card