cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2337
Views
0
Helpful
16
Replies

Nat Rule not working

crawley2017
Level 1
Level 1

Nat Rule not working | Firewalling | Cisco Support Community

Hi,

I am newbie and learning to manage the ASA 5505.

I have got a site where we have one broadband with one Static IP.

I wanted to configure to monitor CCTV but it doesnt seem to work.

I have used Packet tracer and I get the error on access list  Config Implicit Rule.

Can please someone direct me where I am going wrong here?

object network CAMERA
nat (any,outside) dynamic interface

access-list acl-outside extended permit tcp any object CAMERA eq 8000

Thanks,

16 Replies 16

Hi Crawley,

Can you please send the whole configuration of the ASA?

Spooster IT Services Team


!
hostname ASA
enable password encrypted
names
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
switchport access vlan 4
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
no forward interface Vlan4
nameif inside
security-level 100
ip address 192.168.1.254 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group Dialler
ip address pppoe setroute
!
interface Vlan4
nameif DMZ
security-level 0
ip address 192.168.231.254 255.255.255.0
!
ftp mode passive
dns domain-lookup inside
dns server-group DefaultDNS
name-server 192.168.1.2
name-server 192.168.1.10
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network CAMERA
host 192.168.1.246
object service 8000
service tcp destination eq 8000
object-group service CAMERA-PORTS tcp
port-object eq 8000
access-list CCTV-Monitoring extended permit tcp any object CAMERA object-group CAMERA-PORTS
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu DMZ 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
!
object network obj_any
nat (inside,outside) dynamic interface
access-group CCTV-Monitoring in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
no ssh stricthostkeycheck
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0


dhcpd auto_config outside
!
dhcpd address 192.168.231.10-192.168.231.200 DMZ
dhcpd dns 8.8.8.8 208.67.222.222 interface DMZ
dhcpd enable DMZ
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:d6498956d9481d43fc8cb50bc67dd85e
: end

Review Cisco Networking for a $25 gift card