NATing with Duplicate Subnets

[tkowalski]

I have an issue where I need to set up a site to site VPN with a partner company through a PIX. The partner company has a site to site tunnel with a vendor that is a duplicate subnet to ours (10.0.0.0/16). Can anyone point me in the right direction as to performing a NAT on a PIX to change my subnet to the partner to look like 10.241.21.0/24? Thanks in advance for any and all help provided.

[drolemc]

Check this link for more info:

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800b07ed.shtml

[tkowalski]

Thanks for the input. I have seen that article and it does not apply to my situation. There is also an article regarding a PIX and a 3000 concentrator that is very close, but not quite what I am looking for. See this article also...

http://www.cisco.com/en/US/customer/tech/tk583/tk372/technologies_configuration_example09186a00800949f1.shtml

Thanks again for the input....