01-30-2018 10:48 AM - edited 02-21-2020 07:14 AM
Hello All ,
i have file server ip 10.X.212.X , (Gateway - ASA firewall) , Client IP 10.x.214.X
Client is unable to access shared folder on file server .
Below are the Cap Details :
1049: 12:43:54.487004 802.1Q vlan#301 P0 10.X.214.X.61601 > 10.X.212.X.445: SWE 3945913378:3945913378(0) win 8192 <mss 1460,nop,wscale 8,nop,nop,sackOK>
1070: 12:43:55.576721 802.1Q vlan#301 P0 10.X.214.X.61603 > 10.X.212.X.139: SWE 340660149:340660149(0) win 8192 <mss 1460,nop,wscale 8,nop,nop,sackOK>
1136: 12:43:57.482930 802.1Q vlan#301 P0 10.X.214.X.61601 > 10.X.212.X.445: SWE 3945913378:3945913378(0) win 8192 <mss 1460,nop,wscale 8,nop,nop,sackOK>
1164: 12:43:58.592147 802.1Q vlan#301 P0 10.X.214.X.61603 > 10.X.212.X.139: SWE 340660149:340660149(0) win 8192 <mss 1460,nop,wscale 8,nop,nop,sackOK>
1413: 12:44:03.486013 802.1Q vlan#301 P0 10.X.214.X.61601 > 10.X.212.X.445: S 3945913378:3945913378(0) win 8192 <mss 1460,nop,nop,sackOK>
1443: 12:44:04.595351 802.1Q vlan#301 P0 10.X.214.X.61603 > 10.X.212.X.139: S 340660149:340660149(0) win 8192 <mss 1460,nop,nop,sackOK>
1926: 12:44:16.609724 802.1Q vlan#301 P0 10.X.214.X.137 > 10.X.212.X.137: udp 50
1969: 12:44:18.139809 802.1Q vlan#301 P0 10.X.214.X.137 > 10.X.212.X.137: udp 50
2050: 12:44:19.655437 802.1Q vlan#301 P0 10.X.214.X.137 > 10.X.212.X.137: udp 50
Please help me to understand above , that why client unable to access shared folder on file server.
Regards ,
Solved! Go to Solution.
01-30-2018 11:16 AM
Hello @aslam.bajwa,
It seems you don´t have reply from the internal subnet but I would it will be better if you download the capture as a PCAP file in order to look deeper in the information, this is the link for reference: https://www.tunnelsup.com/packet-captures-on-cisco-asa/
HTH
Gio
01-30-2018 12:40 PM
01-31-2018 02:15 AM
Hello,
If these captures are taken on the interface facing the server, then these are sufficient to prove that ASA can be ruled out. If not, then take captures on the interface facing the server .212 and if it shows packet leaving ASA, then we can focus on next layer3 device.
HTH
AJ
01-30-2018 11:16 AM
Hello @aslam.bajwa,
It seems you don´t have reply from the internal subnet but I would it will be better if you download the capture as a PCAP file in order to look deeper in the information, this is the link for reference: https://www.tunnelsup.com/packet-captures-on-cisco-asa/
HTH
Gio
01-30-2018 12:36 PM
01-30-2018 12:40 PM
01-30-2018 12:42 PM
Yes from the file server.
Gio
01-31-2018 02:15 AM
Hello,
If these captures are taken on the interface facing the server, then these are sufficient to prove that ASA can be ruled out. If not, then take captures on the interface facing the server .212 and if it shows packet leaving ASA, then we can focus on next layer3 device.
HTH
AJ
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide