08-17-2015 10:44 AM - edited 02-21-2020 05:33 AM
I have a Cisco 881 Router on which I have upgraded IOS to 15.4(3)M3, and onto which I have installed CCP Express 3.1.1.
All seems normal once I fixed the known bug that breaks internet access when you have a DHCP WAN connection (this is in a lab). However, when using CCP Express on the device, there is no security tab, there are no security settings available, and the only time that security is mentioned is in the basic wizard, where it is listed as "Secuirty: Not Configured" in the very last step.
If you browse to http://10.10.10.1/flash:ccpexp/html/utm.html, you can see the security settings, but the page does not display properly, the settings do not seem to be effective, and there is no link from the main interface. This unit has an Advanced IP Services license, and the security settings do show if I use the Windows PC version of CCP Express 2.8. This problem appears to be present in CCP Express 2.8, 3.0, 3.1, and 3.1.1.
Any thoughts?
Tom
08-19-2015 01:46 PM
[chirp]....[chirp]....[chirp]...
Nothing but crickets. Anyone out there have any ideas?
09-25-2015 08:36 AM
For anyone searching the archives, it seems that version 15.5(1)T is required to access the security functions in CCP Express versions 3.0 and newer.
The most recent version of CCP Express flashes this information up while loading, and it can also be found in the release notes for version 3.0 (http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_configuration_professional_express/v3_0/rlsnts/ccp_express_rel_notes.html). Unfortunately, while the release notes for iOS 15.5 do mention support for the Cisco 881 router, the software is only available for the newer C881 Router (see a discussion thread I started on this topic here: https://supportforums.cisco.com/discussion/12616131/cisco-881-router-and-ios-155)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide