NTP on 2110 ASA

[philipplant]

Hello,

I have a Firepower 2110 running a multi-context ASA 9.9(2) instance.  The chassis is configured and synchronized with an NTP server, but the ASA clock is still wrong.

I cannot find commands in the ASA instance to synchronize with an upstream NTP server, these seem to be missing from the system and administration context, as are the show ntp commands.

Please would someone advise how I should sync the ASA instance's clock with either NTP or the FTD chassis?

Thanks,

Philip

[philipplant · Accepted solution]

To answer my own post: patience is required!

It took around 3 hours for the clock on the ASA instance to synchronize with the FTD chassis, which happened without any further configuration changes.