As mentionned in the PIX 6.3 specifications, we are able to nat outer address on less secure interface on the PIX (6.3).
In my case, I have a connection to open from a host A (192.168.40.40) on the inside interface to a host B (10.125.125.125) on the outside interface. I have to nat (static) the address 10.125.125.125 to 190.168.50.50 on the outside interface so the internal host (A) will open its connection to host B using 192.168.50.50 as destination IP address instead of 10.125.125.125.
My question is:
1- How should I configure that NAT on the PIX?
2- The security rule to permit A to initiate a connection to B, should be configured with which destination address (the real or the natted)?
Thanks for your help.