07-03-2016 02:13 PM - edited 03-12-2019 12:59 AM
Having a few problems with my outside vlan 5 and inside vlan 10; my outside vlan are all pingable; but when i try to ping from the or switch my inside vlan10 gateway its unpingable to inside gateway. I have two route setup on the ASA5510 firewall; one for my outside network default 0.0.0.0 0.0.0.0 Outside and i have another to allow my internal vlans to reach the outside network 10.0.0.0 255.0.0.0 Outside. I don't what else can be blocking ping access to my internal gateway; all of my acl are allowing traffic. Does any else have this problem where your outside network are pingable but your internal network is not pingable to the gateway; Could it be a switch port on the switch or could it be the router ??
Please if any have some suggestions feel free
thanks
Solved! Go to Solution.
07-09-2016 01:42 PM
What you're trying to do?
Did you add the outside network to your nat config?
07-09-2016 05:29 PM
07-09-2016 08:25 PM
On ASA you authorize wan network to reach your wan network in icmp. You should say any to out-network
07-10-2016 06:16 AM
Ok; i was able to change it and im still seeing hits off the outside network; but i think im done with the fw; im seeing traffic In and Out; I'm just messing with the ACL to restrict certain packets coming In and Out. The only thing i can't understand is why the Fw can't ping 8.8.8.8 from the In or out network; but other than that im think good
07-10-2016 07:20 AM
The firewall doesn't work like a router where you can source your packet. However if you type ping 8.8.8.8 it knows how to go outside and it should works. When you do so, do you see any packet on router, any nat?
07-10-2016 10:59 AM
07-10-2016 12:15 PM
Could you drop your router config?
could you do a debug ip packet on the router to see if you see packets?
maybe a packet-capture on asa would help as well.
07-10-2016 03:56 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide