PBR on PIX 7.0

[aashish.c]

Hi,

I have a firewall (515E) with 3 interfaces with OS 7.0. To the outside interface we have a router conected to 1 ISP for internet and to the DMZ we have another router connected to the 2nd ISP for internet.

The inside interface is connected to a switch and has couple of VLAN's configured. The switch is L3 and capable of running PBR. I want to route few of the vlans traffic from 1 ISP and the remaining through the 2 ISP.

If it is not possible on PIX then suggest some workaround.

regards

aashish

[didyap]

You can assign VLANs to the physical interfaces on the PIX Firewall, or you can configure multiple logical interfaces on a single physical interface and assign each logical

interface to a specific VLAN.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094aad.shtml