06-26-2003 10:13 AM - edited 02-20-2020 10:49 PM
A friend of mine has a PIX501 and whenever he boots up, all the lights start to flash and never stop. What could be or is the issue? My first thought is an IOS issue.
Thanks!!
06-26-2003 06:47 PM
I believe the lights are a diagnostic in nature, indicating a problem with the device.
Your friend should open a case with TAC and if TAC determines that it is indeed a hardware problem, TAC can assist your friend in replacing the device if it is covered by a Smartnet contract.
peter
06-27-2003 10:15 PM
Hi,
I had the same problem w/ my PIX-501. It worked fine for 6 months then it started to flash anytime a cable was plugged into it. The flashing was actually the PIX rebooting over and over again. TAC replaced it w/ a new one and this second one has been fine now for 7 months.
C-ya,
Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide