I'm implementing my first PIX this weekend, and I wanted to post my config for you experts to look at before I start. If anybody notices something that may cause some problems, or if you have any suggestions, I would greatly appreciate it. Thanks.
PIX Version 6.3(2)
interface ethernet0 100full
interface ethernet1 100full
interface ethernet2 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 DMZ security50
hostname PIX
domain-name xxxxxx.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
no fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
access-list outside_access_in permit icmp any any echo-reply
access-list outside_access_in permit tcp any host xxx.xx.xxx.93 eq www
access-list outside_access_in permit tcp host xxx.xx.xxx.82 host 216.27.224.89 eq smtp
access-list outside_access_in permit tcp any host xxx.xx.xxx.92 eq cmd
access-list outside_access_in permit tcp any host xxx.xx.xxx.93 eq https
pager lines 24
logging on
logging timestamp
logging monitor debugging
logging buffered errors
logging trap debugging
logging history errors
logging host DMZ 192.168.0.5
mtu outside 1500
mtu inside 1500
mtu DMZ 1500
ip address outside xxx.xx.xxx.94 255.255.255.240
ip address inside 10.0.0.1 255.255.255.0
ip address DMZ 192.168.0.1 255.255.255.0
ip verify reverse-path interface outside
ip audit info action alarm
ip audit attack action alarm
pdm logging debugging 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (DMZ,outside) xxx.xx.xxx.93 192.168.0.100 netmask 255.255.255.255 0 0
static (DMZ,outside) xxx.xx.xxx.92 192.168.0.5 netmask 255.255.255.255 0 0
static (DMZ,outside) xxx.xx.xxx.89 192.168.0.25 netmask 255.255.255.255 0 0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 xxx.xx.xxx.81 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 10.0.0.0 255.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
no floodguard enable
ip verify reverse-path interface outside
ip local pool VPN-POOL 10.0.0.175-10.0.0.250
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout uauth 0:05:00 absolute
sysopt connection tcpmss 0
sysopt connection permit-ipsec
sysopt connection permit-pptp
sysopt connection permit-l2tp
vpdn group PPTP-VPDN-GROUP accept dialin pptp
vpdn group PPTP-VPDN-GROUP ppp authentication chap
vpdn group PPTP-VPDN-GROUP ppp authentication mschap
vpdn group PPTP-VPDN-GROUP ppp encryption mppe 128
vpdn group PPTP-VPDN-GROUP client configuration address local VPN-POOL
vpdn group PPTP-VPDN-GROUP client configuration dns 10.0.0.6
vpdn group PPTP-VPDN-GROUP client configuration wins 10.0.0.6
vpdn group PPTP-VPDN-GROUP pptp echo 60
vpdn group PPTP-VPDN-GROUP client authentication local
vpdn username xxxxxx password <put password here>
vpdn username xxxxxx password <put password here>
vpdn enable outside
vpdn enable inside
telnet 10.0.0.0 255.255.0.0 inside
telnet timeout 5
ssh 10.0.0.0 255.0.0.0 inside
ssh timeout 5
console timeout 0
terminal width 80
