02-20-2007 12:51 PM - edited 03-11-2019 02:36 AM
Hello all,
I have a request to allow access for SSH on port 22 for a googlemini device.
Does anyone know the syntax? command line information to accomplist this on a PIX 515e.
Solved! Go to Solution.
02-20-2007 01:04 PM
There could be two scenarios:
1) googlemini device has its own public IP address (x.x.x.x) and its private IP is y.y.y.y
Assuming that there is no access-list defined on outside interface of PIX, commands would be-
static (inside,outside) x.x.x.x y.y.y.y
access-list 101 permit tcp any host x.x.x.x eq 22
access-group 101 in interface outside
2) googlemini device doesnt have a free public IP address, need to share the public IP address assigned to outside interface IP, commands would be-
static (inside,outside) tcp interface 22 y.y.y.y 22
access-list 101 permit tcp any interface outside eq 22
access-group 101 in interface outside
I hope this helps.
Regards,
Vibhor.
02-20-2007 01:04 PM
There could be two scenarios:
1) googlemini device has its own public IP address (x.x.x.x) and its private IP is y.y.y.y
Assuming that there is no access-list defined on outside interface of PIX, commands would be-
static (inside,outside) x.x.x.x y.y.y.y
access-list 101 permit tcp any host x.x.x.x eq 22
access-group 101 in interface outside
2) googlemini device doesnt have a free public IP address, need to share the public IP address assigned to outside interface IP, commands would be-
static (inside,outside) tcp interface 22 y.y.y.y 22
access-list 101 permit tcp any interface outside eq 22
access-group 101 in interface outside
I hope this helps.
Regards,
Vibhor.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide